Diagnosing a Water Heater Failure: What to Do If It Ceases Working

Book With Us Today!

In this article below you'll find lots of superb resources concerning How to Troubleshoot and Repair an Electric Water Heater.



Several modern residences utilize an electric hot water heater for their heater, because of its ease as well as ease of use. Nonetheless, much like any other electric appliances, issues might emerge with its use, suddenly. It can be actually frustrating to get up to a chilly shower rather than a warm one or having your bath with water that isn't warm adequate or even also hot. Whatever the situation might be, water heater problems can be rather aggravating. Thankfully, we have actually made a list of feasible solutions to your hot water heater issues. There are a variety of aspects that could create many of these troubles, it could be an issue with the power supply, the electric heating element, or the thermostat. Before doing anything, guarantee you switch off the main power supply for security. Whatever the issue is, getting it fixed must not present way too much of an issue if you comply with these steps:

Call A Specialist:


If after changing all damaged parts and resetting your temperature, the hot water heater still isn't functioning, you might need to speak to a specialist plumber for a professional opinion. The issue with your heater could be that the hot and cold taps have been switched or it may be undersized for the amount of hot water required in your home. Whatever the instance may be, an expert plumber would certainly aid solve the trouble.

Check Your Power Supply:


As fundamental as this may appear, it is extremely necessary. Without appropriate power, your hot water heater will not work. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power trouble. Examine if the fuse is blown out or the circuit breaker tripped. If the breaker is the problem, simply turn it off and on once again. Change any kind of damaged or worn-out fuse. Check the appliance with power after these adjustments to see if it's currently working.

Examine Your Thermostat:


If your hot water heater still isn't working or the water appearing isn't hot enough, you might require to inspect the temperature setups on your upper thermostat. Make certain the circuit breaker is switched off before doing anything. Open up the accessibility panel and press the red button for temperature level reset over the thermostat. This should aid heat the water. Turn the circuit breaker back on as well as examine if the trouble has been resolved.

Inspect the Heating Element in the Hot Water Heater:


If it's not a power problem, after that try checking out your burner if it is still functioning. Evaluate each of your burner to make sure the problem isn't with any of them. If any one of them is defective, replace that component and after that check whether the hot water is back on.

Conclusion


Hot water heater troubles are not constantly major. A lot of them result from small issues like a blown fuse or damaged heating element. Replacing the damaged parts ought to suffice. However, if you are still incapable to address the issue, give a call to your nearest plumber to find to get it dealt with.


What To Do If Your Hot Water Suddenly Stops Working


The water heater tripped the circuit breaker


The occasional power surge can sometimes cause your large appliances to trip their circuit breaker. Head to your electrical panel to see if the switch associated with your water heater needs to be reset


Your water heater’s fuel supply has been shut off.


If you own a gas or propane water heater, someone might have closed the gas valve. Without gas, your water heater can’t heat water. Ensure the valve is in the “open” position (parallel to the gas line, as opposed to perpendicular to it). If you smell gas (a “rotten egg” smell) or hear the hissing sound of a gas leak, evacuate your home at once, notify your utility company from a safe distance away, and contact a professional to repair your gas line.


The water heater’s pilot light is out.


Although newer water heaters no longer have pilot lights, it’s commonplace for older gas water heaters to have them. Typically, you can find instructions for relighting the pilot light somewhere on the side of the water heater tank, in the owner’s manual, or in online instructions from the manufacturer. Of course, you can always consult a qualified plumber regarding water heater pilot light issues as well.


There’s a problem with the water heater’s burner.


  • Wait for the burner to turn off. If you have no hot water, it’s probably off already. Once it’s off, set your water heater’s thermostat to 120°F.


  • Go to a faucet and turn on the hot water. Let it continue to run for a minute or so while you check on the burner.


  • Observe to see if the burner ignites. If it does, you can adjust the temperature as needed while the water still runs. However, the Consumer Product Safety Commission (CPSC) strongly recommends a temperature no higher than 120°F to prevent scalding.


  • If your burner does not ignite, there’s most likely a problem with the thermostat. You’ll need a plumbing professional to repair it.


  • The water heater’s capacity is too small.


    If you own a storage tank water heater, sometimes a couple of showers in a row can use up most of the hot water stored in the tank. Then, when it’s time for the next person to shower, they’ll run out of stored hot water partway through and then they'll experience water not getting hot. You have some options:


  • Wait longer before showering so the hot water can “fill up” again.


  • Upgrade to a water heater with a bigger tank.


  • Switch to an on-demand (or tankless) water heater.


  • Do You Have a Faulty Heating Element?


    Hot water is heated by one or more heating elements that are located at the bottom of the hot water heater. Due to sediment cover, these elements become less effective at heating water. Even without sediment buildup, heating elements can become damaged and inefficient after years of regular use.



    In the event that the hot water heater's heating element fails, the water will be lukewarm throughout the home. You can restore hot water to your home by contacting a plumber or hot water heater technician.

    https://www.albrightsmechanical.com/blog/2021/january/what-to-do-if-your-hot-water-suddenly-stops-work/


    No Hot Water — Water Heater Repair

    I hope you enjoyed our post about What Would Cause My Electric Water Heater to Stop Working?. Many thanks for taking time to browse our piece of content. Sharing is caring. Helping people is fun. Thanks so much for going through it.


    Browse Our Site

    Leave a Reply

    Your email address will not be published. Required fields are marked *